Skip over navigation
« Previous Next »

Continuous Concrete Pool Edging

Continous concrete pool edging, where the concrete is cast to form the pool edge, can be used to provide a different look and feel to a pool as shown by the pictures below. While not suitable for every project it does allow for some different design options especially for unusual shapes.

It is possible to buy polystyrene forms that will allow different profiles to be created at the edge.

There are some restrictions in it's use that should be noted:

  1. A form must be able to be built allowing the canitlever over the pool edge
  2. there must be a slip layer at the top of the pool itself to allow movement of the slab.
  3. Cuts must be planned so they come off the corner to minimise the risk of cracking (as shown in the phot below

Andy Lett

West End Concrete
http://www.westendconcrete.co.nz/
021 868 886

Latest News & Case Studies

Case Study

Coatesville Driveway

What dream driveways are made of! Nearly 1000m3 of PeterFell White...

Case Study

The Mayfair Building, Christchurch

With so much of Christchurch's heritage devastated by the 2011...

News

Lusty's Lagoon, Lake Taupo Holiday Resort

Owners Trish and Lloyd Lusty at the Lake Taupo Holiday Resort run a...

Case Study

Mana Tukutuku, Randwick Park Sports and Neighbourhood Centre

Opus International Consultants have designed this recently opened...

Case Study

Beautifully executed drive way

Usually, driveways are either plain concrete or black exposed...

Previous Newsletters

Archived Newsletters