PFL Satin Sealer

Provides the same wet look and durability as the PFL Glaze but with a satin finish, and is suitable for use on all interior and exterior spaces.

It is a superior solvent-based acrylic coating for interior and exterior use, and contains high solids of a very high-quality resin that ensures a thick coating for long term durability.

PFL Satin Sealer can be used together with PFL Anti-Slip to improve slip resistance where it is a concern. But it should be noted that slip resistance is best achieved utilising surface texture in the concrete – if the surface is too smooth the PFL Anti-Slip will do little. Further, pooled water is a problem for slip whatever the surface and caution should always be taken, eg around swimming pools.

When considering using this indoors, note that the pungent smell can linger if adequate ventilation not present – always ensure good airflow when coating. It will pass eventually, but for this reason, many people choose the PFL Acrylic or PFL Epoxy.

View product guide

View safety data sheet

This sealer is suitable for use in escape paths.

PFL Satin Sealer from PeterFell has been tested to ISO 9239.1 and achieved the minimum critical radiant flux requirements of NZBC C/AS2-AS6, Flooring 4.17.3, Table 4.2.

Peter Fell Satin concrete sealer 2 litre bottle

How much you’ll need.

The following estimates are offered in good faith but the final quantity may be be more or less depending on the concrete. They are conservative numbers, not because we are trying to sell more, but because most clients don’t want to have to order twice.

Also note it is often easier to buy a single unit than the two smaller ones (eg buying 1x20L is cheaper than buying a 1x10L & 1x5L), and we so have put in the cheapest options. Any excess can be kept or used to apply a third coat.

Concrete Area (m2)
0m2
0m2

Estimated amount of PFL Satin Sealer needed = 32L

You will need:

10 4L 2 x 2L
20 7L 1 x5L, 1x 2L
30 10L 1 x 10L
40 20L 1 x 20L
50 20L 1 x 20L
60 20L 1 x 20L
70 25L 1 x 20L, 1 x 5L
80 30L 1 x 20L, 1 x 10L
90 30L 1 x 20L, 1 x 10L
100 40L 2 x 20L
120 40L 2 x 20L
140 50L 2 x 20L, 1 x 10L
160 60L 3 x 20L
180 60L 3 x 20L
200 70L 3 x 20L, 1 x 10L

Order your PFL Satin Sealer.

Please note that the following prices exclude GST and freight. These are calculated when you work through your order.

Size Price
Testpot $7.65
1L $32.35
2L $46.20
5L $109.75
10L $196.35
20L $311.85

Quantity: x

Check out our Sealer Auxiliary products to aid you with your project.