Offers the durability of a regular glaze concrete sealer, with colour to hide any marks or to give the concrete a whole new look.
This sealer is suitable for use in escape paths.
PFL Glaze Sealer from PeterFell has been tested to ISO 9239.1 and achieved the minimum critical radiant flux requirements of NZBC C/AS2-AS6, Flooring 4.17.3, Table 4.2.
How much you’ll need.
The following estimates are offered in good faith but the final quantity may be be more or less depending on the concrete. They are conservative numbers, not because we are trying to sell more, but because most clients don’t want to have to order twice.
Also note it is often easier to buy a single unit than the two smaller ones (eg buying 1x20L is cheaper than buying a 1x10L & 1x5L), and we so have put in the cheapest options. Any excess can be kept or used to apply a third coat.
As the Tinted Sealers are made to order, please allow at least 24 hours from time of order for these to be manufactured.
Concrete Area (m2)
Estimated amount of PFL Tinted Sealer, Glaze needed = 32L
You will need:
| 10 | 4L | 2 x 2L |
| 20 | 7L | 1 x5L, 1x 2L |
| 30 | 10L | 1 x 10L |
| 40 | 20L | 1 x 20L |
| 50 | 20L | 1 x 20L |
| 60 | 20L | 1 x 20L |
| 70 | 25L | 1 x 20L, 1 x 5L |
| 80 | 30L | 1 x 20L, 1 x 10L |
| 90 | 30L | 1 x 20L, 1 x 10L |
| 100 | 40L | 2 x 20L |
| 120 | 40L | 2 x 20L |
| 140 | 50L | 2 x 20L, 1 x 10L |
| 160 | 60L | 3 x 20L |
| 180 | 60L | 3 x 20L |
| 200 | 70L | 3 x 20L, 1 x 10L |
Tinted sealer colour range.
PFL Tinted Sealer Ash
Order your PFL Tinted Sealer, Glaze.
Please note that the following prices exclude GST and freight. These are calculated when you work through your order.
| Size | Price |
| Testpot | $7.65 |
| 1L | $40.45 |
| 2L | $60.05 |
| 10L | $259.90 |
| 5L | $138.60 |
| 20L | $427.35 |
Quantity: x
